| 16 INPUT CHANNELS : Each channel has separate balanced phone jacks for MIC & LINE, accepts both balanced & unbalanced signals. |
INDIVIDUAL CHANNEL HAS
GAIN CONTROL : This is used to set optimum level for minimum noise CUT & BOOST to adjust tonal quality. |
| ECHO CONTROL : This control echo level of individual channel in the final mix. |
| PAN CONTROL : This routes the channel to either Left or Right Output. |
| AUX. CONTROL : This controls the level of the channel in the final mix to Aux. Send Output. |
| ON/OFF SWITCH : This switch allows switching channel ON or OFF without disturbing the control settings. |
| CHANNEL FADER : This slide fader sets the final level of the channel in the overall mix of the program output. |
AUX. SEND & RETURN
These have been provided for sending the pre-fader output of channels for monitoring or for adding a Special effects unit. |
TAPE SECTION
A 4-Pin RCA connector allows connection of a Cassette Recorder for recording / playback. An On/Off switch and Gain control for playback allows adjustment of
the level of cassette program in the overall program mix. |
ECHO SECTION
Delay, Repeat and Level controls of this section can be set at desired positions. This effect can be added to all
the channels. |
MONO / STEREO OUTPUT
Mono output is available from Left & Right Output channels when the switch is in mono position. |
MASTER FADERS
They Control overall Left and Right output |
HEADPHONE OUTPUT
This is to connect headphone etc. |
|
